Download Microsoft Teams Voice Engineer MS-720 Dumps

test2022-06-04T06:00:55+00:00

MS-720 Microsoft Teams Voice Engineer exam is the requirement for Microsoft 365 Certified: Teams Voice Engineer Expert Certification. We offer you the latest MS-720 Dumps, then you can test your skills for taking the Microsoft MS-720 exam. The Microsoft Teams Voice Engineer MS-720 Dumps will give you real exam questions with the precise answers to show you the actual Exam. Practice Microsoft Teams Voice Engineer MS-720 Dumps, you will get to know the actual exam clearly and take your Microsoft MS-720 exam confidently.

You should try MS-720 practice test questions to assess yourself.

Page 1 of 3

1. You have a Microsoft I earns deployment and an existing telephony solution that provides PSTN capability to on premises third-party PBX systems in two separate locations.

You need to implement a redundant PSTN solution for Microsoft Teams Phone. The solution must use the existing telephony earner services. The solution must ensure that outbound calls can be made if a component fails.

Which three components should you implement? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point

highly available Session Border Controllers (SBCs)

calling policies

PSTN usages

voice routing policies

tenant dial plans

2. You are deploying Microsoft Teams Phone.

You have offices in the United States, the United Kingdom, Brazil, India, and China.

You will use Direct Routing for all the locations.

You need to create a network topology for roaming bandwidth policies.

Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

Add the Teams client public IP addresses to the Trusted IPs list.

Create a network site.

From the Microsoft 365 admin center, assign a usage location.

Set Preferred country or region for media traffic for the Session Border Controller (SBC).

Implement dynamic emergency calling with Presence Information Data Format Location Object (PIDF-LO).

3. You need to prevent a specific user from calling international phone numbers from within a Microsoft Teams meeting.

What should you do?

Assign a domestic-only calling plan to the user.

Assign a tenant dial plan to the user.

Disable Enterprise Voice for the user

Assign a dial-out policy to the user.

Remove Communications Credits from

4. You create a network region Region1 in Microsoft Teams.

You are adding a network site to Region1. The site has a 1.5-Mb connection.

You need to ensure that all users at the site have a good voice experience.

What should you do?

Create and assign a Teams Network Roaming Policy that has IP video disabled.

Assign the Region1 users a meeting policy that has a media bit rate of 1,500 Kbps.

Run the Microsoft 365 network connectivity test tool.

Tag all traffic with a DSCP value of 46.

5. Your company uses Microsoft Skype for Business Server 2015 and Enterprise Voice as the PSTN solution.

You plan to migrate all users to Microsoft Teams Calling Plans.

You will decommission Skype for Business Server after the migration is complete.

You need to ensure that all the users retain their current phone number once the migration is complete. The solution must minimize the downtime of PSTN features for each user.

What should you do first?

From the Microsoft 365 admin center, purchase Communications Credits for all the users.

Schedule a port order for the phone numbers of all the users.

From the Microsoft Teams admin center, order phone numbers for all the users.

Migrate all the users to Teams.

6. You have a Microsoft Teams Phone deployment that uses Direct Routing.

You create a new Teams user named User1.

You need to enable User1 as an agent in a call queue.

What should you do first?

Assign a dial plan to User!

Assign a phone number to User1.

Enable hosted voicemail for User1.

Enable Enterprise Voice for User1.

7. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You need to create a new call queue to route calls to support agents. The support agents must be able to see their call queue history and the shared transcribed voicemail. The solution must minimize administrative effort.

Solution: You redirect calls for the call queue to a shared voicemail box.

Does this meet the goal?

Yes

8. You are selecting devices for use in conference rooms. The conference rooms must support two front of room displays.

Which two types of devices meet the requirements? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

Microsoft Teams Rooms on Android

Microsoft Teams displays

Microsoft Teams audio conference phones

Microsoft Teams Rooms on Windows

Microsoft Surface Hub 2S

9. You need to change the meeting entry notifications to play a tone instead of each attendee’s recorded name.

What should you configure in the Microsoft Teams admin center?

the Caller ID policies node under Voice

the Meeting settings node under Meetings

the Conference bridges node under Meetings

the Resource accounts node under Org-wide settings

the Meeting policies node under Meetings

10. HOTSPOT

You are deploying Microsoft Teams Calling Plans to three users as shown in the following table.

You need to resolve the issues.

What should you assign to each user? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

Page 2 of 3

11. HOTSPOT

You need to assign a phone number to User1 to meet the technical requirements.

How should you complete the command? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

12. HOTSPOT

You have a Microsoft Teams Phone deployment.

You have a dial plan that contains the following normalization rule:

✑ Pattern: ^8?(d{7})$

✑ Translation: +1330$1

How will the phone numbers be normalized? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

13. You have a Microsoft Teams Phone deployment.

You are deploying a new remote site.

You have a Session Border Controller (SBC) that has an E1/T1 Primary Rate Interface (PRI) deployed to the remote site.

You plan to deploy a Survivable Branch Appliance (SBA) to ensure PSTN connectivity.

Which type of endpoints is supported by the SBA?

call queues in Microsoft Teams

audio conferencing in Microsoft Teams

Microsoft Teams panels

Microsoft Teams Windows desktops

14. HOTSPOT

Your company is migrating from a legacy PBX system to Microsoft Teams.

The phone number range is +1-423-555-1xxx. The PBX system uses four-digit dialing internally. Extensions are the last four digits of the number.

You need to ensure that you can use four-digit dialing for your numbers in Teams. The solution must minimize administrative effort.

How should you configure the normalization rule? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

15. You are planning a Microsoft Teams Phone deployment that will use Direct Routing. You need to allow traffic from Microsoft 365 to a Session Border Controller (SBC).

Which IP address ranges should you allow through the firewall?

132.245.0.0/16 and 40.104.0.0/15

10.10.0.0/24 and 10.11.0.0/24

8.8.8.8/32 and 4.4.2.2/32

52.112.0.0/14 and 52.120.0.0/14

16. Your company has a Microsoft Teams Phone deployment that uses Direct Routing and a single carrier.

You deploy a new Session Border Controller (SBC) that shows as healthy in the Microsoft Teams admin center.

You place a test call over the new SBC, and the call succeeds.

When you attempt to transfer the call, the transfer fails. A portion of the SIP ladder is shown in the exhibit. (Click the Exhibit tab.)

What is a possible cause of the issue?

The SSL certificate of the SBC is incorrect.

The Refer on the SBC is misconfigured.

notify is enabled in the SIP options of the SB

The carrier rejects the format of the forwarded FROM number.

17. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

Your company uses configuration profiles to manage Microsoft Teams-certified IP phones.

The Standard configuration profile is applied to the IP phones.

The help desk receives reports that several user phones fail to lock automatically after the timeout period.

You need to verify whether the configuration profile is applied to the problematic phones.

Solution: From Device in the Microsoft Teams admin center, you select IP Phones, select the Configuration profiles tab, select Standard Phone Policy, and select Assigned devices.

Does this meet the goal?

Yes

18. You need to configure a toll-free dial in bridge for Teams meetings. The solution must meet the technical requirements.

Which three prerequisites must be met before you can assign the toll-free bridge to Teams meeting organizers? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

Purchase Communications Credits.

Assign a phone number to a resource account.

Get an auto attendant toll-free number.

Get a Dedicated conference bridge (Toll Free) number.

Purchase a Microsoft 365 Domestic and International Calling Plan license.

From the meeting policy, set Allow dial -in users to bypass the lobby to On.

Assign a phone number to the bridge.

19. You have a Microsoft Teams Phone deployment.

You need to ensure that a user named [email protected] can call international phone numbers by using Direct Routing.

Which type of policy should you use?

a caller ID policy

a calling policy

a teams policy

a voice routing policy

20. You have a Microsoft Teams Phone deployment and a Survivable Branch Appliance (SBA) at a site.

You add a new Teams user.

You need to ensure that the user at the site can place and receive PSTN calls in the event of an internet outage.

What should you do?

Add the user as a member of a call queue.

Modify the online voice routing policy.

Run the Granc-CsTeamsSurvivableBranchAppliancePolicy cmdlet.

Run the Granc-CsTenancDialPlan cmdlet.

Page 3 of 3

21. HOTSPOT

You have a Microsoft Teams Phone deployment.

You have a cloud-only user named [email protected].

You need to enable a Direct Routing phone number for [email protected].

How should you complete the PowerShell script? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

22. You are adding new sites to your company.

The reporting team needs location-based reports in Microsoft Power B1 that include the subnet information of the new sites.

You need to add the information to Microsoft Teams.

What should you do?

From the Microsoft Call Quality Dashboard, upload tenant data.

From the Microsoft Teams admin center, define a network subnet.

From the Microsoft Teams admin center, define a network topology.

From the Microsoft Teams admin center, add the subnets to the Network planner.

23. You have a Microsoft Teams Phone deployment. The 613 7010 5XXX phone number range is allocated to the Session Border Controller (SBQ.

A user named User! is configured as shown in the following exhibit.

User1 reports that when an external caller attempts to call the phone number or User1, the external caller receives an error message.

User 1 can make outbound calls, but no caller to appears.

Which two commands should you run to resolve the issues? Each correct answer presents part or the solution. NOTE: Each correct selection is worth one point.

A)

Option A

Option B

Option C

Option D

Option E

24. DRAG DROP

A user uses the Microsoft Teams client on a Windows device.

The user reports call failures.

You need to send the Teams client logs to Microsoft support to troubleshoot the call failures.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

25. Your company has offices in 10 countries. The company has a tenant dial plan configured for each country.

The company recently opened an office in a new country.

You need to create a new tenant dial plan that meets the unique dialing requirements of the new country.

What should you do?

Run the New-CsOnlineVoiceRoutingPolicy cmdlet.

From the Microsoft Teams admin center, select Voice, select Dial plan, and then select Add.

From the Microsoft Teams admin center, select Locations, select Network topology, and then select Add.

Run the Sec-CsTenancDialPlan cmdlet.