Free To Latest Update CCNP Data Center 300-615 DCIT Dumps

test2022-08-30T09:22:30+00:00

The most recent CCNP Data Center 300-615 DCIT Dumps are available here. FreeTestShare Cisco 300-615 DCIT Dumps are based on the most recent exam questions and are 100 percent guaranteed to help you pass your exam. Candidates for the 300-615 exam benefit from using the CCNP Data Center 300-615 DCIT Dumps, which allows them to study more efficiently and in less time. CCNP Data Center 300-615 DCIT Dumps cover real exam questions and answersto help you prepare for the 300-615 exam well. With real 300-615 questions and answers, you can learn about the exam topics and pattern fast to pass your exam successfully.

Take a free 300-615 practice test to assess your skills!

Page 1 of 4

1. Refer to the exhibit.

An engineer is configuring boot from iSCSI on a Cisco UCS B-Series Blade Server, but the LUN fails to mount .

Which action resolves the issue?

Statically configure the target information in the Boot Policy.

Configure an MTU size of 9000 on the appliance port.

Configure a QoS policy on the vNI

Set a connection timeout value of 250 in the iSCSI Adapter Policy.

2. An attempt to use a global vNIC redundancy template pair results in a service profile that fails to apply .

Which action resolves the issues?

Create the peer names before creating the templates.

Assign the secondary template first, and then set the peer name.

Assign both templates simultaneously.

Assign the primary template first, and then set the peer name.

3. Refer to the exhibit.

One of the vPC VTEPs fails to route VXLAN traffic to vPC connected hosts. When the issue was being diagnosed, it was discovered that the packets that were expected to be forwarded to the MAC address on the SWITCH-VTEP-1 are instead forwarded to the MAC address on SWITCH-VTEP-2 and then dropped .

Which action resolves the issue?

Configure a distributed anycast gateway on both peers

Configure ip arp synchronize under the VPC domain on both peers

Configure peer-gateway under the VPC domain on both peers

Configure a different secondary IP address for one of the vPC peers

4. Refer to the exhibit.

An engineer fails to implement a Cisco UCS Manager integration manager. The credentials and IP connectivity between Cisco APIC and UCS Manager are configured as expected .

Which action resolves the issue?

Disable HTTP to HTTPS redirection in Cisco UCS Manager

Enable JSON API on the Cisco UCS Manager

Change the Integration Manager name to FQDN of the Cisco UCS Manager

Install ExternalSwitch app in the APIC controller

5. Refer to the exhibit.

A network engineer creates an EEM script to trigger an SNMP notification when a user enters configuration mode, but the trap is not received when the condition is met .

Which action resolves the issue?

Append action 2.0 event-default to the script

Append action 2.0 cli “conf t” to the script

Modify snmp-trap strdata “Configuration changed” to syslog msg Configuration changed

Modify cli match “conf t” to “snmp match “conf t”

6. DRAG DROP

Drag and drop the actions from the left onto the faults that they resolve on the right. Not all options are used.

7. An engineer removes a VMM domain from an endpoint group called EPG-1, but the distributed port group fails to be deleted .

Which action must be taken to resolve the issue?

Remove the port group manually.

Migrate all virtual machines in the EPG-1 to different hypervisors.

Remove the remaining EPGs from the VMM domain.

Migrate all virtual machines in the EPG-1 to different port groups.

8. Refer to the exhibits.

An engineer troubleshoots switch N5K1, which fails to receive traffic from the file server.

Which set of actions resolves this problem?

Bind native VLAN 10 with Ethemet1/10 and allow VSAN 101 in trunk configuration.

Assign native VLAN 10 with vfc111 and allow VLAN 1101 in trunk configuration.

Bind native VLAN 10 with Ethemet10/1/1 and allow VLAN 10 in trunk configuration

Assign native VLAN 10 with fc2.'l - 2 and allow VLAN 10 in trunk configuration.

9. The external routes fail to propagate to leaf switches in Cisco ACI fabric.

Which two actions resolve the issue? (Choose two.)

Enable the VTEP pool in the fabric

Assign an MP-BGP AS number to the fabric.

Specify the spine nodes as route reflectors

Associate the correct contract to the L30ut.

Configure an MP-BGP area.

10. Refer to the exhibit.

During implementation of a Cisco UCS C-Series Server, an engineer receives the status that is shown in the exhibit .

Which action resolves the issue.

Reconfigure the Drive Type from "Removable" to "Non-Removable"

Insert an SD card into SLOT-2

Configure the RAID that is associated with the card.

Set SLOT-1 Sync Mode to "Auto"

Page 2 of 4

11. Refer to the exhibit.

An engineer troubleshoots the HSRP configuration and notes that the remote end uses HSRP version 1. The engineer sets the local HSRP to version 1, but the problem continues .

Which action resolves the issue?

Change the local group number to 255 or less and request that the remote data center matches the group member in its configuration.

Set the local group number as 300 in the remote data center configuration

Run version 1 and version 2 HSRP on VLAN300 in the local data center.

Reduce the priority of the local HSRP to below 100 to force the local HSRP to standby and then change the version to version 1.

12. Refer to an exhibit.

An engineer is troubleshooting an upgrade failure on a switch .

Which action resolves the issue?

Save the system image in NVRA

Use the same system image as the kickstart image.

Load a new system image.

Reload the same system image.

13. Refer to the exhibit.

An engineer configures the server port on a Cisco Nexus 5000 Series Switch. The switch connects to an NPV edge switch port. The server fails to send the FC traffic to the fabric .

Which action resolves the issue?

Enable the NPIV mode on the Cisco Nexus 5000 switch.

Match the VSAN membership on both ends of the connection.

Configure the BB_credit buffer on the uplink port.

Replace the SFP in slot fc2/12.

14. An engineer is implementing a storage VDC, but fails .

Which two prerequisites must be in place before a storage VDC is implemented? (Choose two.)

M-Series module

ESSENTIALS license

STORAGE-ENT license

FCoE license

F-Series module

15. Refer to the exhibit.

The script fails to bring up Ethernet 1/2 when Ethernet 1/1 goes down .

Which change enables the script to run as intended?

Set the port VLAN

Include an action to manually shut down Ethernet 1/1

Add an action to configure the terminal

Configure an enable action

16. A network engineer discovers a DNS resolution problem on a device that is using the Cisco Nexus Bash shell.

The device name is app with an IP address of 10.10.10.1. The primary server IP address is 172.16.10.1 and the secondary server IP address is 172.16.10.2. When the abc.com resolution fails, it should attempt to use efg.com .

Which settings must be added to resolv.conf file to resolve the issue?

Option A

Option B

Option D

17. Refer to the exhibit.

HSRP adjacency fails to form between Nexus7K-1 and Nexus7K-2 .

Which action should be taken to solve the problem?

Configure preempt on one of the switches in the HSRP group.

Configure the same HSRP priority between the two switches.

Configure the correct subnet mask on Nexus7K-1.

Configure HSRP version 2 on Nexus7K-2.

18. Recommission the server with new firmware.

19. A request to activate the port security database is rejected .

Which action do you perform to investigate the cause of the issue?

Enable the auto-learning feature.

Use the force option to identify rejected devices.

Find conflicting entries between the active and configuration databases.

Verify that devices are fully attached to the active database.

20. Refer to the exhibit.

A network engineer configures an authentication domain through an LDAP provider on the Cisco UCS Manager for users from different companies to log into their respective organizations created in the UCS Manager. The engineer tests the configuration and notices that any user has login access to any organization in the UCS Manager .

Which action should be taken to resolve the issue?

Configure the Filter field with sAMAccountName=$company

Configure the Attribute field with the company

Configure the Attribute field with sAMAccountName=$company

Configure the Filter field with the company

Page 3 of 4

21. Refer to the exhibit.

An engineer is troubleshooting the connectivity between Server-1 and Server-2 .

Which action resolves the connectivity issue?

Enable BGP advertise pip feature on both leaf switches

Configure the same source IP address on NVE and virtual peer link on leaf switches

Classify CFS messages for strict priority queue on spine switches

Change all ports on spine switches as port-type fabric

22. The Cisco Nexus switch is connected to a peer switch that is not running Cisco NX-OS. The switches are connected using port channel and are experiencing packet loss .

Which action should be performed on the Cisco Nexus switch ports to resolve this issue?

Turn on lacp suspend-individual.

Turn on lacp graceful-convergence.

Turn off lacp graceful-convergence.

Turn off lacp suspend-individual.

23. Enable the firmware on an adapter.

24. Refer to the exhibit A network administrator must provide Bash shell access to the support team for all of the Cisco Nexus 9000 Series Switches. The newly created user that is named "bashusers" fails to access the Bash shell.

Which action resolves the issue?

Associate bashusers with the Cisco NX-OS vdc-admin role and activate the nxapi feature.

Associate bashusers with the Cisco NX-OS dev-ops role and activate the bash-shell feature.

Associate bashusers with the Cisco NX-OS network-admin role and activate the guestshell feature.

Associate bashusers with the Cisco NX-OS network-operator role and activate the bash-shell feature.

25. Refer to the exhibit.

The scheduler job fails to run.

Which action resolves the issue?

Change the file name.

Configure the authentication credentials.

Change the TFTP server address.

Configure the RBAC authentication.

26. The script fails to convert a JSON variable into a Python dictionary .

Which action resolves the issue?

Use a json.dumps(json_output) function

Define a json_output as a YAML object, yaml json_output

Fix the JSON syntax by modifying “attribures” to “attribures”:

Invoke a function yaml.loads(json._output ,decoder_”json”)

27. DRAG DROP

Drag each item listed on the left to its proper category on the right Not all items will fit the categories.

28. One of Cisco Nexus Series interfaces has become errdisabled with the error message “DCX-No ACK in 100 PDUs” .

What is the cause of this error?

The host has not responded to the Control Sub-TLV DCBX exchanges of the switch.

The acknowledgement number in the server response has not incremented for 100 exchanges.

Cisco Discovery Protocol is disabled on the switch.

LLDP is disabled on the switch.

29. Refer to the exhibit.

The cURL command fails to complete.

Which action resolves the problem?

Remove ".json" from the UR

Include -p "password" in the command.

Add -H "X-Auth-Token" to the command.

Change ".json" to ".xml" at the end of the UR

30. Refer to the exhibit.

The integration between Cisco UCS Manager and Cisco UCS Central failed .

Which action resolves the issue?

Implement the consistent NTP source between the appliances

Implement the connectivity between the appliances through a firewall

Configure the certificate between the appliances

Configure the shared secret key between the appliances

Page 4 of 4

31. Your client reports that many flaps and server cluster disconnects occur in their data center. While troubleshooting the issue, you discover a network attack hitting their Cisco Nexus 7000 Series Switches and determine that the source IP addresses are spoofed .

Which first-line security solution resolves this issue?

Dynamic ARP Inspection

Unicast RPF

IP Source Guard

Storm Control

32. DRAG DROP

An engineer is troubleshooting issues in Cisco UCS Director.

Drag and drop the possible causes from the left onto the correct issues on the right.

33. Refer to the exhibit.

A recent configuration change removes the HSRP adjacency between the SW-1 and SW-2 Cisco Nexus switches. The change causes the servers on this subnet to lose Internet access.

Which action restores the connectivity of all servers on VLAN 13?

Disable HSRP IP redirects on SW-1.

Set the HSRP priority to 70 on SW-1.

Activate HSRP preempt on SW-2.

Set the HSRP password on SW-2.