Easy Way To Pass HPE6-A75 Aruba Certified Edge Professional Exam

test2022-01-26T08:49:38+00:00

By test Aruba Certified Edge Professional Exam 0 Comments

Looking for easy way to pass your HPE6-A75 Aruba Certified Edge Professional Exam? The Aruba Certified Edge Professional certification validates that you have achieved three of the four professional-level Aruba certifications. You can use the free HPE6-A75 practice tests to familiarize yourself with our product. If you prepare using HPE6-A75 questions and answers, you will pass on the first try.

Here are HPE6-A75 practice questions to help you gauge your level of preparation. Now is the time to try it!

Page 1 of 2

1. An administrator implements a standalone controller that runs ArubaOS 8.x.

Which feature should the administrator configure to optimize the RF operation for the company’s WLAN?

AirMatch

Clustering

ARM

Zones

2. An administrator deploys an AP at a branch office. The branch office has a private WAN circuit that provides connectivity to a corporate office controller. An Ethernet port on the AP is connected to a network storage device that contains sensitive information. The administrator is concerned about sending this traffic in clear-text across the private WAN circuit.

What can the administrator do to prevent this problem?

Redirect the wired port traffic to an AP-to-controller GRE tunnel.

Convert the campus AP into a RA

Enable AP encryption for wired ports.

Enable IPSec encryption on the AP’s wired ports.

3. 1.Which technologies can prevent split brain in a VSF fabric that includes Aruba 2930F switches?

ARP MAD or OOBM MAD

VLAN MAD or ARP MAD

OOBM MAD or LLDP MAD

LLDP MAD or VLAN MAD

4. Refer to the exhibit.

A network administrator sets up 802.1X authentication to a RADIUS server on an AOS-Switch. The RADIUS server and user devices are both set up to use REAP MSCHAPv2. The administrator tests the authentication and sees the output shown in the exhibit.

Which issue could cause this output?

The RADIUS shared secret does not match on the switch and the server.

The administrator entered the wrong password for the test account.

The switch does not have a certificate tor port-access installed on the switch.

The switch port is set for user mode 801. I

but the RADIUS server is set for port mode.

5. What is true about clustering and AP connections to cluster members?

The AP will always stay connected to the LMS IP address configured in the AP profile.

During rebalancing, the active load is redistributed first.

The default thresholds are 75% for the Rebalanced Threshold and 25% for the Unbalanced Threshold.

AP load balancing is disabled by default.

6. Refer to the exhibit.

Based on the configuration for the client's certificate private key as shown, which statements accurately describe the settings? (Select two.)

More bits in the private key will increase security.

The private key for TLS client certificates is not created.

The private key is stored in the ClearPass server.

More bits in the private key will reduce security.

The private key is stored in the user device.

7. Refer to the exhibit.

Several interfaces on an AOS-Switch enforce 802. IX to a RADIUS server at 10.254.378.521. The interface 802. IX settings are shown in the exhibit, and 802. IX is also enabled globally. The security team have added a requirement tor port security on the interfaces as well.

Before administrators enable port security, which additional step must they complete to prevent issues?

Set an 802. l X client limit on the interfaces.

Manually add legitimate MAC addresses to the switch authorized MAC list.

Enable eavesdropping protection on the interfaces.

Enable DHCP snooping on VLAN 20.

8. Refer to the exhibit.

The network administrator needs to set up BGP between the two company switches. Switch-1 and Switch-2. The BGP connection does not establish.

Based on the exhibits, what does the administrator need to do to fix the issue?

Enable the multihop option for the neighbor on each of the switches.

Enter the network command for 10.0.0.0/24 in the router BGP mode on each switch.

Enable BGP on the interfaces that the switches use to reach each other.

Set the update source for the neighbor to the local loopback interface on each switch.

9. A company has AOS-Switches deployed at sites with inexperienced IT staff. The main office network administrators want to track if configurations change on branch switches.

What should be set up for this purpose?

an SNMP trap

an RMON alarm

an auto-config server

an lP SLA profile

10. A network administrator can set the OSPF metric-type on an AOS-Switch to Type 1 or Type 2.

What is the difference?

A Type 2 metric marks external routes that can be advertised in NSSAs, while a Type 1 metric marks external routes that can only be advertised in normal areas.

A Type 2 metric assigns cost 1 to a 100 Gbps link, while a Type 1 metric assigns cost 1 to all links of 100 Mbps or higher.

A Type 2 metric is assigned to multiple external routes that are aggregated together, while a Type 1 metric does not permit external route aggregation.

A Type 2 metric stays the same as the external route is advertised, while a Type 1 metric increments with internal OSPF link costs.

Page 2 of 2

11. An administrator wants to use Airwave to manually add devices on the network.

Where should the administrator perform this action?

in Device Setup

in Groups

in AMP Setup

in Devices

12. Refer to the exhibit.

mike

We can't know this from the screenshot above.

Employee

john

13. When is it necessary to use an SNMP based Enforcement profile to send a VIAN?

When we have to assign a vlan to a wired user on a third party wired switch that doesn't support RADIUS return attributes.

When we have to assign a VLAN to a wired user on an Aruba Mobility Access Switch.

When we have to assign a VIAN to a wired user on an Aruba Mobility Controller.

When we have to assign a VLAN to a wired user on a third party wired switch that doesn't support RADIUS authentication.

When we have to assign a VLAN to a wireless user on an Aruba Mobility Controller.

14. Refer to the exhibit.

Traffic between the servers m Area l takes a less optimal path rather than the link associated with VLAN l OOO, subnet 10.0.0.0/30.

Based on the exhibits, why is this the case?

The metric on the VLAN 1000 interface is too low.

Switch-1 and Switch-2 cannot achieve adjacency on VLAN 1000 due to mismatches.

OSPF routing switches choose the best intra-area routes based on Area 1 links only.

The link between Switch-1 and Switch-2 has gone down.

15. Refer to the exhibit.

An administrator implements AP licensing on a Mobility Master (MM).

• Each campus is responsible to purchase its own AP licenses.

• There are 900 AP licenses deployed in the global pool

• There are three dedicated pools.

• From the global pool, 300 AP licenses are assigned to each dedicated pool.

Network engineers at CampusA want to deploy an additional 100 APs. Currently all of the AP licenses in CampusA and CampusB are allocated, but only 200 of the AP licenses m CampusC are allocated.

What can the administrator do to add capacity for CampusA in alignment with campus policies?

Allow CampusA to share from the CampusC pool.

Add 100 more AP licenses and assign them to the CampusA pool.

Move 100 licenses from the CampusC pool to the global pool.

Add 100 more AP licenses to the global pool.